Ash's Beefy Coffee Table FINAL.mp4

Step 1

Cut List

Step 2

Cut the leg pieces to size. Stack 3 pieces together, with wood glue, and clamp together for 24 hours. Build 4 leg assemblies

Step 3

Cut the planks to size and drill 1 1/2" pocket holes on one edge and both ends of each plank. Attach them together with 2 1/2" pocket hole screws.

Step 4

Cut the outside planks to size and drill 1 1/2" pocket holes on one edge and both ends. Attach 2 of the planks to 2 legs with 2 1/2" pocket hole screws and wood glue. Do this for both sides.

Step 5

Cut the short apron piece to size and drill 1 1/2" pocket holes on both ends. Attach them to the ends of both plank assemblies with 2 1/2" pocket hole screws and wood glue.

Step 6

Attach both leg assemblies to the top plank assembly with 2 1/2" pocket holes and wood glue, through the side aprons and into the legs.

Step 7

Attach the bottom plank assembly to the bottom of the legs with 2 1/2" pocket hole screws and wood glue.

Step 8

Attach the remaining side planks to the bottom plank assembly with 2 1/2" pocket hole screws and wood glue on the ends (where they attach to the legs).

Step 9

Cut the long apron pieces to size and drill 1 1/2" pocket hole screws at both ends. Attach them to the plank assemblies and legs with 2 1/2" pocket hole screws and wood glue.

Step 10

Cut the support pieces to size and drill 1 1/2" pocket holes at both ends. Center them under both plank assemblies and attach them to the long aprons with 2 1/2" pocket hole screws and wood glue.

Step 11

Sand down the entire table and add a finish! Make sure to share your builds with us on social media and use #shanty2chic so we can share them too!Happy Building!