Shanty 2 Chic

Step 1

Cut List 1

Step 2

Cut List 2

Step 3

Cut the frame pieces to size. Drill 3/4" pocket holes at the end of each of the long boards. Attach them to the short boards with 1 1/4" pocket hole screws and wood glue.

Step 4

Cut the plywood sheets to size and attach them to the frame with 5/8" staples and wood glue.

Step 5

Cut the top and bottom trim pieces to size. Attach them to the top and bottom of the barn door frame with 1 1/4" brad nails. The bottom of the trim should be flush with the bottom of the frame.

Step 6

Cut the side trim pieces to size and attach them to the sides of the barn door with 1 1/4" brad nails and wood glue.

Step 7

Cut the top and bottom, front trim. Attach it to the top and bottom of the plywood with 5/8" pin nails and wood glue.

Step 8

Cut the vertical bender boards to size. Attach them to the sides of the plywood with 5/8" pin nails and wood glue.

Step 9

Cut the squares to size, center them on the plywood according to the sketch and attach them to the plywood with 5/8" pin nails and wood glue.

Step 10

Cut the side trim pieces for the squares. Attach them on the outside of the squares with 5/8" pin nails and wood glue.

Step 11

Cut the top and bottom trim pieces to size and attach them the same way.

Step 12

Cut the final trim pieces to size. Center them on the squares according to the sketch and attach them the same way.

Step 13

Cut the wheel blocks to size and attach them to the top corners of the barn door with 1 1/4" brad nails and wood glue.

Step 14

Fill your nail holes, sand it down and add a finish! This is a great project to customize with the trim. Get creative with it and make it your own!Make sure to share your builds with us on social media and use #shanty2chic so we can share them too!Happy Building!