Christmas star wreath to makeChristmas star wreath to make

Step 1

Start by removing the bottom plastic piece from the trees. Lay the trees so the metal sections that aren’t covered are together (so the trees are opposite each other)

Step 2

If you don’t have zip ties you could use the string that is at the bottom of the trees. If you have zip ties, I used 2 to secure the trees together. Repeat this process with the 6 trees.

Step 3

Next lay the trees across each other to make the star shape. I made an x shape and then laid the last trees across the top. Use zip ties to secure it in place.

Step 4

I used the twist tie on the backside of the bow to secure it in the middle of the star shape but you could also use a zip tie for a more secure hold

Step 5

Using the wire cutters, clip sections of the eucalyptus off and the pine cones.

Step 6

The red berries you can pull off of the wires that they come on. Adhere these to the wreath using hot glue and pressing firmly.

Step 7

Start by removing the bottom plastic piece from the trees. Lay the trees so the metal sections that aren’t covered are together (so the trees are opposite each other)

Step 8

If you don’t have zip ties you could use the string that is at the bottom of the trees. If you have zip ties, I used 2 to secure the trees together. Repeat this process with the 6 trees.

Step 9

Next lay the trees across each other to make the star shape. I made an x shape and then laid the last trees across the top. Use zip ties to secure it in place.

Step 10

I used the twist tie on the backside of the bow to secure it in the middle of the star shape but you could also use a zip tie for a more secure hold

Step 11

Using the wire cutters, clip sections of the eucalyptus off and the pine cones.

Step 12

The red berries you can pull off of the wires that they come on. Adhere these to the wreath using hot glue and pressing firmly.