DIY Wooden Yarn Card Organizers

Step 1

Affix your basswood sheet onto a purple StrongGrip cutting mat using a brayer to press deep into the adhesive. Tape down the edges of the wood onto the mat using masking tape.

Step 2

Use the free SVG file or Cricut Design Space file to cut out 2 wood yarn cards. Before removing the mat from the machine check the cut. Add an additional cut if necessary. For any areas that don't cut through, carefully use a craft knife.

Step 3

Glue the yarn cards together clamping together using binder clips and fabric or felt to prevent damage to the wood. Allow to dry for several hours.

Step 4

Remove clamps, trim away dried glue and sand down the cards until smooth.

Step 5

Cut the names of your yarn colors out of black permanent vinyl. Weed away the excess vinyl, apply transfer tape, then transfer the design onto the wood cards.

Step 6

Cut an 18" piece of yarn for each color then cut in half. Loop the 2 pieces of yarn, run the center through a slot. Pull the tails through the loop to create a tassel. Trim excess.

Step 7

Run a loose leaf binder clip through the hole in the corner of the yarn cards to keep together and easily hang for storage.