How to build an easy, new deck for an inflatable hot tub!

Step 1

Dry-fit 4 frame boards into a square shape, with full front and back boards showing and the side boards tucked inside. Attach corners with screws. Position concrete blocks underneath frame.

Step 2

Cut the shape of each block with a half moon edger to remove the sod underneath. Replace blocks, then set frame on blocks.

Step 3

Place a level on all four sides to help adjust the footings until the frame sits level.

Step 4

Attach the inside 2x6 framing all in one direction (positioned front to back) at a max of 16" apart.

Step 5

Place a top deck board on one end of frame positioned left to right. Attach with two screws at each stud possible.

Step 6

Use the thick end of wooden shims as spacers before placing the next board. Repeat until deck is covered, measuring each board as you build to ensure they are straight.

Step 7

If you don't wish to cut the last board to size, install a board on the opposite end before finishing, then slightly jog the spaces inside to even things out.

Step 8

Lightly sand any rugged edges. Allow treated wood to cure before adding further protection. (approx 6 months)

Step 9

Place down gravel, sand or landscape fabric to avoid weeds growing through.