Mason Jar Bathroom Organizer

Step 1

Download the BRUSH letters by signing up in the newsletter box.

Step 2

Upload it to Cricut Design Space.

Step 3

Then size the word to fit your wood panel and cut from vinyl.

Step 4

Weed away all excess vinyl.

Step 5

Apply the vinyl to the top of your board using transfer tape. With the division between the boards, I applied the top then pressed down into the gap. And finally applied the bottom of the word to the next board. You can watch this in the video above.

Step 6

Then measure and mark where your mason jars need to be attached.

Step 7

Drill through the clamp to make a hole large enough for your screw. Use a scrap piece of wood under your clamp when doing this step in order to not damage your work surface.

Step 8

Then screw through the hole in the clamp and into your board in four areas.

Step 9

Tighten your screws and add the mason jars.

Step 10

Then just tighten up the pipe clamp to complete your mason jar wall decor.